warmroom® Magnetic Radiator Heat Saver

warmroom is a flexible magnetic radiator foil designed to reduce heat transfer from steel radiators into the wall behind them. It attaches directly to the rear of a suitable water-filled steel radiator, without adhesive, separate fixings or removing the radiator.

The dark-brown magnetic face holds the material against the radiator, while the low-emissivity aluminium surface faces the wall. This reduces radiative heat transfer across the space behind the radiator and limits the amount of heat passing into the wall. Radiators positioned against external walls are the priority, particularly in solid-wall properties or buildings with poorer wall insulation.

warmroom was independently tested by Energy House Labs at the University of Salford in a controlled study representing conditions experienced during a typical UK winter day. Under the test conditions, it reduced space-heating gas use by 2.9% ±2.1 and reduced 24-hour external-wall heat loss directly behind the tested radiator by 54%. A maximum reduction of 66% was measured during the 24-hour period, with no measurable adverse effect on internal space-heating provision.

Results will vary between properties according to factors including wall construction, radiator position, heating pattern, system flow temperature and the proportion of radiators installed against external walls.

  • Independently tested by Energy House Labs at the University of Salford
  • Magnetic fitting to suitable water-filled steel radiators
  • No adhesive or separate fixings required
  • Designed to fit without removing the radiator
  • Can be cut with scissors to suit the usable space
  • Six-sheet packs for individual radiators
  • 30m rolls available for larger and repeat requirements
  • Suitable for homes, rental properties and housing programmes

The material is not suitable for electric radiators or radiators without a sufficiently magnetic steel surface. If you are unsure about the radiator construction, rear access or quantity required, Anchor Magnets can review the application before you order.

Filter products

The highest price is £90.85
£
£

List View

2 Products

Choosing and Ordering warmroom® Magnetic Radiator Foil

warmroom is available in two formats. The household pack contains six ready-cut sheets measuring 195mm × 500mm, making it suitable for an individual radiator or a smaller domestic requirement. The 195mm-wide, 30m roll can be cut to suit multiple radiators and is intended for larger installations, housing projects and repeat requirements.

Products shown as available online can be purchased directly from this page. For larger quantities, phased installations or planned repeat orders, contact Anchor Magnets to discuss availability, delivery requirements and supply arrangements.

Before ordering, check that the radiator is water-filled, non-electrical and made from steel with sufficient magnetic attraction. The dark-brown magnetic face should sit against the rear of the radiator, with the reflective aluminium surface facing the wall. The material can be trimmed to fit the usable space without removing the radiator, subject to suitable rear access and clearance.

You do not need to have every detail confirmed before contacting us. Tell us how many radiators are involved, their approximate dimensions and whether the requirement is for an individual property or a larger programme. Our team can then help identify the most appropriate format and quantity.

Choose a warmroom pack online or contact Anchor Magnets to discuss a larger requirement.